2.3.2 Security
Perform this procedure to configure WLAN security.
WPA2-PSK
To configure the WPA/WPA2-PSK authentication mode, perform the following steps:
1. On the menu bar at the top of the window click on the Network tab and then from
the menu on the left choose WLAN and then Security.
2. In the middle window, select WPA/WPA2-PSK from the Authentication Type drop-
down list. Next Type a memorable password into WPA Passphrase box and select
TKIP+AES from the WPA Encryption Algorithm drop-down list.
Select Submit and the security configuration is complete.
Page 12
To Previous Page
Loading...
