Back Panel
Figure 1-2 shows the back panel of the ZXHN F668.
Figure 1-2 Back Panel
Table 1-3 lists the interfaces and buttons on the back panel.
Table 1-3 Interfaces and Buttons on the Back Panel
Side Panel
Figure 1-3 shows the side panel of the ZXHN F668.
Figure 1-3 Side Panel
Table 1-4 lists the interfaces and buttons on the side panel.
Table 1-4 Interfaces and Buttons on the Side Panel
Page 5
Interface/Button Description
Red Button Press this button to power on or off the device.
Power Socket Connected the 12vDC power supply here.
PON Optical fibre connects here. (Class 1 Laser Product)
POTS1-POTS2 RJ11 Telephone Interface.
LAN1-LAN4 RJ-45 LAN interface. Connect a PC or IP STB using RJ-45 network cable.
Battery Backup power monitoring interface. (Battery not supplied with F668)
Interface/Button Description
WLAN WLAN button, to enable or disable WLAN function.
WPS WPS switch, to enable or disable Wi-Fi Protection Set-up.
Reset
USB
With device powered ON, press this button for 10 seconds will restore the
device to default settings.
USB interface, for connecting a storage device for file sharing, data backup or
data recovery.
To Next Page
Loading...
