Zte ZXHN H108L - Page 14

ZXHN H108L User Manual
7
Function Color Definition
Flickering
Green
There are some data packets passing
the MODEM.
Red
Device attempted to become IP
connected and failed (no DHCP
response, no PPPoE response, PPPoE
authentication failed, no IP address
from IPCP, etc.)
Off No Ethernet signal is detected.
Blinking User data going through Ethernet port
LAN1-LAN4
Solid Green Ethernet interface is ready to work
Off No radio signal is detected.
Blinking User data going through WLAN port
WLAN
Solid Green WLAN interface is ready to work.
Solid Green
The wireless terminal device is
connected through WPS successfully.
The indicator turns off five minutes
later.
Slowly Flash
Green
The wireless terminal device is
connecting with H108L through WPS.
Fast Flash
Green
There is error when the wireless
terminal is connecting to H108L
through WPS.
WPS
Off
There is no wireless terminal device
connected to H108L through WPS or
the wireless terminal device has been
connected to H108L through WPS for
more than five minutes.