Need help?Do you have a question about the Zte ZXR10 ZSR V2 and is the answer not in the manual?
General| Product Series | ZXR10 |
|---|---|
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 5% to 95% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
| Power Supply | AC |
Provides steps to configure an IPv6 address on an interface, including enabling IPv6 and setting necessary parameters.
Details the procedure for configuring NDP to enable address resolution, neighbor discovery, and unreachability detection.
Describes how to manually configure static IPv6 routes, controlling network traffic flow precisely.
Details the configuration of RIPng attributes, including timers, summarized routes, and redistribution.
Explains how to configure OSPFv3 protocol attributes, interface attributes, route summarization, and redistribution.
Details the configuration of IS-ISv6 basic and global parameters, summary routes, and redistribution.
Details the configuration of BGP4+ functions, including basic setup, route load sharing, and FRR.
Details the steps for configuring IPv6 routing policy, including attributes and application.
Details the procedure for configuring IPv6 policy routes, including ACL and route-map associations.
Details the procedure for configuring public IP multicast, including enabling multicast routing and setting limits.
Describes how to configure IPv6 static multicast, including setting limits, routes, and interfaces.
Details MLD configuration for version, querier election, SSM-mapping, and timer settings.
Details the procedure for configuring IPv6 PIM-DM, including enabling multicast, PIM, and PIM-DM on interfaces.
Details PIM-SM configuration, including static RP, candidate BSR/RP, and global parameters.
Details IPv6 PIM-SSM configuration by specifying the SSM group address range.
Details configuration for IPv6 tunnels: 6in4, 6to4, and 4in6, including interface and mode settings.
Details configuration for 6RD tunnels, including interface setup, tunnel mode, and IPv4/IPv6 parameters.
Details 6PE configuration, including BGP setup, address families, and neighbor settings for IPv6 connectivity.
Details 6VPE configuration, including VRF creation, IPv6 address family activation, and interface binding.
Details configuring IPv6 ACL rules for TCP, UDP, ICMP, and resequencing rules.
Details configuring IPv6 URPF on interfaces, enabling strict (rx) or loose (any) modes with optional ACL matching.
Details IPv6 QoS configuration, referring to QoS concepts and commands for IPv6 environments.
Details IPv6 VRRP configuration, including version, packet sending mode, and interface attributes.
Details DHCPv6 server configuration, including address pools, prefix pools, and DHCPv6 pools.
Describes DHCPv6 relay configuration, including server groups, policies, and interface parameters.
To Next Page
