Zte ZXR10 ZSR V2 - Figure 19-3 Network Topology of the Ripng Configuration between CE and

Chapter196VPEConguration
StepCommandFunction
ZXR10(config-ripng-vrf-vrf-name)#interface
<interface-name>
EntersRIPnginterface
conguration.Theinterfaceis
boundtoVRF.
3
ZXR10(config-ripng-vrf-vrf-name)#ipv6ripenableEnablesRIPngonan
interface.
4ZXR10(config)#routerbgp<as-number>EntersBGProute
congurationmode.
ZXR10(config-bgp)#address-familyipv6vrf<vrf-name>EntersVRFaddressfamily
congurationmode.
5
ZXR10(config-bgp-af-ipv6-vrf)#redistributerip
[metric<metric-value>],[route-map<map-tag>]
RedistributestheRIPng
routes.
AsshowninFigure19-3,itisrequiredtorunRIPngbetweenCE1andPE1.The
followingexampleshowshowtocongureRIPngonCE1andPE1respectively.
Figure19-3NetworkTopologyoftheRIPngCongurationBetweenCEandPE
CongurationonCE1:
CE1(config)#ipv6routerrip
CE1(config-ripng)#interfacegei-1/1
CE1(config-ripng-if-gei-1/1)#ipv6ripenable
CE1(config-ripng-if-gei-1/1)#exit
CongurationonPE1:
PE1(config)#ipv6routerripvrfvpn_a
PE1(config-ripng-vrf-vpn_a)#redistributebgp
19-5
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential