Zte ZXR10 ZSR V2 - Page 240

ZXR10ZSRV2CongurationGuide(IPv6)
PE1(config-ripng-vrf-vpn_a)#interfacegei-1/1
PE1(config-ripng-vrf-vpn_a-if-gei-1/1)#ipv6ripenable
PE1(config-ripng-vrf-vpn_a-if-gei-1/1)#exit
PE1(config-ripng-vrf-vpn_a)#exit
PE1(config)#routerbgp100
PE1(config-bgp)#address-familyipv6vrfvpn_a
PE1(config-bgp-af-ipv6-vrf)#redistributerip
PE1(config-bgp-af-ipv6-vrf)#redistributeconnected
PE1(config-bgp-af-ipv6-vrf)#exit
5.CongureOSPFv3betweenaCEandaPE.
StepCommandFunction
ZXR10(config)#ipv6routerospf<process-id>[vrf<
vrf-name>]
EnablesOSPFveandenters
OSPFVRFconguration
mode.
1
ZXR10(config-ospfv3-process-id)#router-id
<router-id>
ConguresanOSPFv3
Router-ID.
2ZXR10(config-ospfv3-process-id)#interface
<interface-name>area<area-id>[instance<instance-id>]
Denesaninterfacethatruns
OSPFveandconguresarea
IDsoftheinterface
3ZXR10(config-ospfv3-process-id)#redistributebgp
[{[tag<tag-value>],[metric<metric-value>],[metric-type
{ext-2|ext-1}],[route-map<routemap>]}]
RedistributesBGProutes
4ZXR10(config)#routerbgp<as-number>EntersBGProute
congurationmode.
5ZXR10(config-bgp)#address-familyipv6vrf<vrf-name>EntersVRFaddressfamily
congurationmode.
6ZXR10(config-bgp-af-ipv6-vrf)#redistribute{
ospf-int|ospf-ext}<process-id>[metric<metric-value>],[ro
ute-map<map-tag>]
RedistributestheOSPFv3
routes.
AsshowninFigure19-4,itisrequiredtorunOSPFv3betweenCE1andPE1.The
followingexampleshowshowtocongureOSPFv3onCE1andPE1respectively.
19-6
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential