Zte ZXR10 ZSR V2 - Ripng Configuration Instances; Ripng Basic Configuration Example; Figure 5-1 Topology of Ripng Basic Configuration Example

Chapter5RIPngConguration
CommandFunction
ZXR10(config)#showipv6rip[vrf<vrf-name>]DisplaysthecontentoftheRIPng
protocol.
ZXR10(config)#showipv6ripdatabase[{X:X::X:X/<0~128
>|<X:X::X:X>}][vrf<vrf-name>]
DisplaystheRIProutedatabase
information.
ZXR10(config)#showipv6ripinterface[vrf
<vrf-name>]<interface-name>
Displaystheinterfacesonwhich
RIPngisenabled.
7.MaintainRIPngrouters.
CommandFunction
ZXR10(config)#clearipv6riproute[vrf<vrf-name
>]{<X:X::X:X>/<0~128>|all}
Deletestheroutesreceivedby
RIPng.
Userscandeleteallthereceived
routesoracertainrouteonly.
–EndofSteps–
5.3RIPngCongurationInstances
5.3.1RIPngBasicConfigurationExample
CongurationDescription
AsshowninFigure5-1,theRIPngrunsonR1andR2tonotifytheRIPngrouteofthese
tworouters.Thefollowingusealoopbackaddressandaredistributionofdirectroutesas
anexampletoillustratetheconguration.
Figure5-1TopologyofRIPngBasicCongurationExample
CongurationFlow
1.EnabletheIPv6protocolontheinterfacesandcongureIPv6addresses.
2.ConguretheRIPngprotocol.
3.EnabletheRIPng-relatedcongurationsontheinterfaces.
5-5
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential