Zte ZXR10 ZSR V2 - Page 62

ZXR10ZSRV2CongurationGuide(IPv6)
<map-tag>:speciestheroutemapusedforprotocolrouteredistribution.
4.EnabletheRIPngprotocolfunctionforaninterface.
StepCommandFunction
1ZXR10(config-ripng)#interface<interface-name>EntersRIPnginterface
congurationmode.
2ZXR10(config-ripng-if-interface-name)#ipv6rip
enable
EnablesRIPngonan
interface.
5.ConguretheoptionalparametersundertheRIPnginterface.
CommandFunction
ZXR10(config-ripng-if-interface-name)#ipv6rip
split-horizon
Enablessplithorizononthe
interface,default:Enable.
ZXR10(config-ripng-if-interface-name)#ipv6rip
poison-reverse
Enablespoisonreverseonthe
interface,default:Enable.
ZXR10(config-ripng-if-interface-name)#ipv6rip
interfaceactive
Congurestheactiveinterface
sothattheinterfaceonlysends
packetsbutdoesnotreceive
packets.
Tocancelthecongurationand
restorenormalpacketsending
andreceiving,runthenoformof
thecommand.
ZXR10(config-ripng-if-interface-name)#ipv6rip
interfacepassive
Conguresthepassiveinterface
sothattheinterfaceonly
receivespacketsbutdoesnot
sendpackets.
Tocancelthecongurationand
restorenormalpacketsending
andreceiving,runthenoformof
thecommand.
ZXR10(config-ripng-if-interface-name)#ipv6rip
neighbor<X:X::X:X>
Congurestheneighboraddress
oftheRIPngsothatunicast
packetsaresenttothisneighbor
only.
ZXR10(config-ripng-if-interface-name)#ipv6rip
originate-default-route[only]
Originatesthedefaultrouteof
theRIPngontheinterface.
6.Verifythecongurations.
5-4
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential