Zte ZXR10 ZSR V2 - Configuring a DHCPv6 Relay

Chapter24DHCPv6Conguration
7.Verifythecongurations.
CommandFunction
ZXR10#showipv6dhcpserveruser[interface
<interface-name>]|[summary]
Showstheclientinformationona
DHCPv6server.
8.MaintainDHCPv6.
CommandFunction
ZXR10#debugdhcpv6serverEnablesDHCPv6serverdebugging
function.
ZXR10#kick-offipv6dhcpserveruser[[interface
<interface-name>]|[prefix<IPv6prefix>[vrf-instance
<vrf-name>]]|[address<IPv6address>[vrf-instance
<vrf-name>]]
KicksoffonlineusersoftheDHCP
serverbythespeciedattribute,suchas
interface,IPv6prexandIPv6address.
–EndofSteps–
24.3ConguringaDHCPv6Relay
ThisproceduredescribeshowtocongureaDHCPv6relay.
Steps
1.EnabletheDHCPv6function.
StepCommandFunction
1ZXR10(config)#dhcpipv6EntersDHCPv6conguration
mode.
2ZXR10(config-dhcpv6)#enableEnablestheembedded
DHCPv6function.
2.CongureaDHCPv6relayservergroup.
StepCommandFunction
1ZXR10(config-dhcpv6)#relayservergroup<number>EntersDHCPv6relayserver
groupcongurationmode
fromDHCPv6conguration
mode.
2ZXR10(config-dhcpv6r-server-group)#algorithm
{normal|first|round-robin}
CongurestheDHCPv6relay
servertouseapolicy.The
defaultforwardingmodeis
normal.
24-7
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential