Zte ZXR10 ZSR V2 - Page 292

ZXR10ZSRV2CongurationGuide(IPv6)
StepCommandFunction
3ZXR10(config-dhcpv6r-server-group)#server<server
-no><server-ipv6>[interface<interface-name>][master]
CongurestheDHCPv6relay
servertotrustinformation.
4ZXR10(config-dhcpv6r-server-group)#deadtime
<time>
Congurestheunavailable
durationaftertheDHCPv6
relayserverfailstosend
messages.
5ZXR10(config-dhcpv6r-server-group)#description
<descript-string>
Conguresthedescriptionfor
aDHCPrelayserver.
6ZXR10(config-dhcpv6r-server-group)#max-retry
<limit-value>
Conguresthenumberofretry
attemptsthattheDHCPv6
relayservergrouprequests
theaddressfromanexternal
DHCPv6server,default:10.
normal:Thenormalmodeistoforwardtoallservers.
rst:Therstmodeismaster/slavemode.
round-robin:Round-robinreferstoloadsharingmode.
<server-no>:servernumber,range:1–5.
[master]:masterserver.
3.CongureaDHCPv6relaypolicy.
StepCommandFunction
1ZXR10(config-dhcpv6)#relaypolicy<policy-name>EntersDHCPv6relaypolicy
congurationmodefrom
DHCPv6congurationmode.
2ZXR10(config-dhcpv6r-policy-group)#default
server-group<server-group-number>
CongurestheDHCPv6relay
servergroupthatisbinded
totheDHCPv6relaypolicy
groupbydefault.
4.CongureDHCPv6relayparameters.
StepCommandFunction
1ZXR10(config-dhcpv6)#relayintfid-format{china-tel|
dsl-forum|user-configuration}
Congurestheinterface-ID
formatoftheDHCPv6relay.
Bydefault,theL3interface
indexisuseddirectly.
24-8
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential