Zte ZXR10 ZSR V2 - Configuring OSPFv3

Chapter6OSPFv3Conguration
Table6-1SimilaritiesandDifferencesBetweenOSPFv3LSAsandOSPFv2LSAs
OSPFv2LSAOSPFv3LSASimilaritieswithandDifferencesfrom
OSPFv2LSAs
RouterLSARouterLSA
NetworkLSANetworkLSA
Thenameisthesameandthefunction
issimilar,exceptthattheLSAnolonger
describesaddressinformationbutisused
onlytodescribethetopologystructureof
theroutingarea.
NetworkSummaryLSAInterAreaPrexLSA
ASBRSummaryLSAInterAreaRouterLSA
Thefunctionissimilarbutthenameis
different.
ASExternalLSAASExternalLSABoththefunctionandthenameare
completelythesame.
LinkLSATheLSAisnewlyadded.
IntraAreaPrexLSATheLSAisnewlyadded.
6.2ConguringOSPFv3
ThisproceduredescribeshowtoconguretheattributesandfunctionsforOSPFv3
protocolroutes,includingprotocolattributes,interfaceattributes,routesummarization,
redistributingroutesintoOSPFv3fromotherroutingprotocols,androuteloadsharing.
Steps
1.EnableOSPFv3.
StepCommandFunction
1ZXR10(config)#ipv6routerospf<process-id>[vrf
<vrf-name>]
EnablestheOSPFv3process.
2ZXR10(config-ospfv3-process-id)#router-id
<router-id>
SpeciestheRouterIDforan
OSPFv3process.
<process-id>:OSPFv3processID,range:1–65535.
vrf<vrf-name>:VRFname,range:1–32characters.
<router-id>:OSPFrouterIDinIPaddressformat.
OSPFv3instancescannotrunproperlyuntiltherouterIDisconguredthroughthe
router-idcommand.
2.CongureOSPFv3protocolattributes.
6-5
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential