Zte ZXR10 ZSR V2 - 6 RD Configuration Example

ZXR10ZSRV2CongurationGuide(IPv6)
StepCommandDescription
4ZXR10(config-ipv6-tunnel-if-interface-name)#t
unnelmodeipv6ip6rd
Setstunnelmodeto6RD.
5ZXR10(config-ipv6-tunnel-if-interface-name)#t
unnelsourceipv4<src-addr>
Conguresthesourceaddress
ofthetunnel,inIPv4address
format.
6ZXR10(config-ipv6-tunnel-if-interface-name)#t
unnel6rd-prefix<ipv6-address-mask>
CongurestheIPv6prexof
the6RDtunnel.Lengthrange:
0–128.
7ZXR10(config-ipv6-tunnel-if-interface-name)#t
unnel6rd-ipv4-mask-length<lenth>
CongurestheIPv4maskofthe
6RDtunnel,namelytheIPv4
prexofthe6RDtunnel.Length
range:0–32.
<tunnel_no>:serialnumberofthetunnel.Upto3000tunnelscanbecreated.
<ipv6-address-mask>:IPv6prexofthe6RDtunnel,lengthrange:0–128.
<lenth>:LengthoftheIPv4maskcodeofthe6RDtunnel,range:0–32.
2.Maintainthe6RDtunnel.
CommandDescription
ZXR10#debugipv6-tunnelEnablesthedebugfeaturefor
thespeciedIPv6tunnel.
ZXR10#showdebugipv6-tunnelDisplayswhetherthedebugging
functionoftheIPv6tunnelis
enabled.
–EndofSteps–
17.36RDCongurationExample
CongurationDescription
Thefollowing6RDcongurationisbasedonthenetworkingtopologyshowninFigure17-7.
BothR1andR2(ZXR10ZSRV2)canserveas6rdBorderRelays(BRs).
17-6
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential