Zte ZXR10 ZSR V2 - Ospfv3 Route Load-Sharing Configuration Examples; Figure 6-3 Topology of Ospfv3 Route Load-Sharing Configuration Examples

Chapter6OSPFv3Conguration
R3#ping63555::52
sending5,100-byteICMPecho(es)to3555:0:0:0:0:0:0:52,timeoutis2second(s).
!!!!!
Successrateis100percent(5/5),round-tripmin/avg/max=2/3/7ms.
6.3.3OSPFv3RouteLoad-SharingConfigurationExamples
CongurationDescription
AsshowninFigure6-3,theloadsharingcongurationsupports64nexthopsatmost.The
followingusestwonexthopsasanexampletoillustratetheconguration.
Figure6-3TopologyofOSPFv3RouteLoad-SharingCongurationExamples
CongurationFlow
1.Establishthenetworkingstructure,asshowninFigure6-3.
2.ConguretheaddressfortheinterfaceandcongureOSPFv3.
3.Conguretheloadsharingfortheinterface.
CongurationCommands
ThecongurationonR1isasfollows:
R1(config)#interfacegei-1/1
R1(config-if-gei-1/1)#noshutdown
R1(config-if-gei-1/1)#ipv6enable
R1(config-if-gei-1/1)#ipv6address2005::1/64
R1(config)#interfacegei-1/2
R1(config-if-gei-1/2)#noshutdown
R1(config-if-gei-1/2)#ipv6enable
R1(config-if-gei-1/2)#ipv6address2006::1/64
R1(config)#interfaceloopback11
R1(config-if-loopback11)#ipaddress2.2.2.2255.255.255.255
R1(config-if-loopback11)#exit
R1(config)#ipv6routerospf1
R1(config-ospfv3-1)#router-id2.2.2.2
R1(config-ospfv3-1)#interfacegei-1/1area0
R1(config-ospfv3-1-if-gei-1/1)#$
R1(config-ospfv3-1)#interfacegei-1/2area0/*configureospfv3*/
6-19
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential