Zte ZXR10 ZSR V2 - Configuring the DHCPv6 Client

ZXR10ZSRV2CongurationGuide(IPv6)
CommandFunction
ZXR10#debugdhcpv6relayEnablesDHCPv6relaydebugging
function.
ZXR10#kick-offipv6dhcprelayuser[[interface
<interface-name>]|[prefix<IPv6prefix>[vrf-instance
<vrf-name>]]|[address<IPv6address>[vrf-instance
<vrf-name>]]
KicksoffonlineusersoftheDHCP
relaybythespeciedattribute,such
asinterface,IPv6prexandIPv6
address.
–EndofSteps–
24.4ConguringtheDHCPv6Client
ThisproceduredescribeshowtoconguretheDHCPv6client.
Steps
1.RunthefollowingcommandtoconguretheDHCPv6client.
StepCommandFunction
1ZXR10(config-interface-name)#ipv6dhcpclient
address[<rapid-commit>]
ObtainsanIPv6address.
2ZXR10(config-interface-name)#ipv6dhcpaddress
<name>X:X::X:X/<1-128>
Congurestheprexofthe
addressoftheDHCPv6client.
3ZXR10(config-interface-name)#ipv6dhcpclient
pd<name>[<rapid-commit>]
EnablestheDHCPv6client
addressprexandconguration
parameterapplicationfunctions.
<rapid-commit>:rapidnegotiation.
–EndofSteps–
24.5DHCPv6CongurationExamples
24.5.1DHCPv6ServerConfigurationExample
CongurationDescription
AsshowninFigure24-3,R1actsasaDHCPserverandthedefaultgateway.ThePC
obtainsanIPaddressdynamicallythroughtheDHCP .
24-10
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential