Zte ZXHN H168N - Configuring Port Trigger

ZXHNH168NMaintenanceManagementManual
ParameterDescription
WANHostIPRangeIPaddresssegmentoftheWAN-sidehosts.
MACMappingEnabletheMACmappingfunctionandmaptheMAC
addressesoftheLAN-sidehoststoasingleMACaddress.
LANHostIPIPaddressoftheLAN-sidehost.
LANHostMACAddressTheMACaddressofLAN-sidehost.
WANPortRangePortsegmentoftheWAN-sidehosts.
LANHostStartPort/LANHostEnd
Port
PortnumberrangeoftheLAN-sidehost.
3.ClickApplybuttontoapplythechanges.
–EndofSteps–
5.4.7ConfiguringPortTrigger
ThesectiondescribeshowtoconguratePortTrigger.PortTriggerprovidesthe
parametersofPortTriggercongurationfeatures.
Whenoneportisconguredtobethetriggeringport,ifoneapplicationusesthattriggering
porttosetupaconnectiontotheoutside,theZXHNH168Ndevicewillforwardtheoutside
connectiontotheinternalforwardingport.
Theporttriggeringisusedtoprotecttheports.Thesystemwillnotopentheseportsunless
theseportsaretriggered.
Steps
1.OnthemainpageoftheZXHNH168N,selectInternet>Security>PortTriggerto
gotothePortTriggerpage.
ThepageasshowninFigure5-35.
5-34
SJ-20140220172310-002|2014-03-03(R1.0)ZTEProprietaryandCondential