Zte ZXHN H196Q - Installation Preparation; Hardware Description

Flashing
The uplink connection is failured, or failure
to configure synchronization in the Extender
mode.
Green
Solid
The uplink connection is normal.
Flashing
The WPS negotiation connection is being
implemented.
Blue
Solid
In the Extender mode, the wireless uplink
signal is strong, or the connection is successful
and the configuration synchronization is
successful in the Extender mode.
Flashing
In the Extender mode, the wireless uplink
signal is weak.
Red
and
purple
Flashing
Flashing red, green, and blue at the same time.
The device is upgrading software.
Rear panel
Figure 3-2 shows the interfaces and buttons on the back panel of the ZXHN
H196Q.