Interface/Button Function
WPS
WPS Push Button, press this button to enable or disable the
WPS function.
Rear Panel
Figure 4-3 shows the buttons on the rear panel of the ZXHN H6645P.
Figure 4-3 The Rear Panel
Table 4-3 describes the interfaces and buttons on the rear panel of the ZXHN
H6645P.
Table 4-3 Descriptions of the Rear Panel
Interface/Button Function
Phone1
Phone2
RJ-11 port. It is used to connect to the phone through the tele-
phone line.
To Next Page
Loading...
