Interface/Button Function
USB2*
Standard USB 2.0 interface, connected to a USB storage device,
printer or 3G Dongle connection.
WAN 2.5G
RJ-45 port. It is used to connect to the uplink Ethernet access
network.
LAN1 2.5G
LAN2-LAN4
RJ-45 port. It is used to connect the modem to computer, STBs
or other network devices.
Power Power supply port. It is connected to the power adapter.
Reset
Reset push button. During power on period, press this button
for more than 5 seconds to reset the current settings to the fac-
tory default.
On/Off Power switch. Power on or power off the device.
*When the SFP uplink port is used, USB1 and USB2 cannot be used at the same
time.
5 Hardware Connection
Figure 5-1 shows the devices that are connected to interfaces of the ZXHN H6645P
To Next Page
Loading...
