LED Indicator Status Description
Solid green The Ethernet connection has been established.
Off The equipment is not powered on, the SFP
module is not inserted or no optical fiber is de-
tected.
WAN
(SFP Optical Link)
Solid green The The SFP uplink physical link negotiation has
been established.
Off The gateway is switched off.
Solid green
The WAN connection is online. The device has
a WAN IP address from IPCP, DHCP or statically
configured. LED remains green in the case of
disconnection due to idle timeout when PPP
dial-on-demand is enabled. Green LED indicates
that the routing connection state is up.
Solid red
The WAN connection is dialing up or fails to
get online. Device attempted to become IP con-
nected and failed (no DHCP response, no PPPoE
response, PPP authentication failed, no IP ad-
dress from IPCP, etc).
INTERNET
Flashing green
The Internet connection has been established
and the data is being transmitted or received.
Off The LAN connection has not been established.
Solid green The LAN connection has been established.
LAN
Flashing green Data transmission is in processing, The indicator
flashes according to the LAN traffic.
Off WLAN RF switch is off.
2.4G
Solid green WLAN RF switch is on.
To Next Page
Loading...
