Zte ZXR10 ZSR V2 Series - Figure 4-2 the Key Components of the ZXR10 3800-8; Figure 4-3 the Ichnography of the ZXR10 3800-8 Architecture

ZXR10 ZSR V2 Series Router Product Description
62 ZTE Confidential & Proprietary
Figure 4-2 The Key Components of the ZXR10 3800-8
The ichnography of the ZXR10 3800-8 architecture is as shown in the figure:
Figure 4-3 The Ichnography of the ZXR10 3800-8 Architecture
With horizontal slots, ZXR10 3800-8 is designed with 9 service slots, in which the
number 0-7 slots are for SPIUs , PIUs and DPIUs, and number 8 slot is for MPFU
According to the size, the ZXR10 3800-8 supports three models of PIU.
 DPIU types: This is high-speed interface board, which bandwidth is upto 10 Gbps.
Size (width x height x deep) is: 176 mm x 20 mm x 175 mm (Single-high DPIU) or 40
mm x 176 mm x 176 mm (Double-hight DPIU), in which Single-high DPIU takes up 3
or 7 slots, Double-hight DPIU takes up combination slot 1 and 3 or slot 5 and 7.
 PIU types: This is general-speed interface board, bandwidth is 1 Gbps. Size (width x
height x deep) is: 176 mm x 20 mm x 175 mm (Single-high PIU) or 40 mm x 176 mm
x 176 mm (Double-hight PIU), in which Single-high PIU takes up 1, 3, 5 or 7 slots,
Double-hight PIU takes up combination slot 1 and 3 or slot 5 and 7.
 SPIU types: This is general-speed interface board, which bandwidth is 1 Gbps. Size
(width x height x deep) is: 77 mm x 20 mm x 182 mm, in which SPIU takes up 0, 2, 4