Need help?Do you have a question about the Zte ZXSDR R8854 and is the answer not in the manual?
General| Power Supply | -48V DC |
|---|---|
| Frequency Bands | 700 MHz, 800 MHz, 900 MHz, 1800 MHz, 2100 MHz, 2600 MHz |
| Technology | LTE |
| Bandwidth | 20 MHz |
| Duplex Mode | FDD |
| Operating Temperature | -40°C to +55°C |
Guidelines for safely transporting the ZXSDR R8854 to prevent damage from scratches and impacts.
Details procedures and safety measures for hoisting the RRU unit, including rope and pulley usage.
Lists critical precautions for installing the ZXSDR R8854, such as not opening airtight parts and correct port orientation.
Lists all necessary instruments and meters required for the installation of the ZXSDR R8854.
Specifies the recommended and minimum clearance dimensions for installing the ZXSDR R8854.
Describes the procedure for mounting the ZXSDR R8854 unit onto a wall, covering necessary accessories and steps.
Details the installation of a single RRU unit on various pole types, including fixing the pole mount assembly.
Explains the process for installing two RRU units on a pole, building upon single unit installation procedures.
Outlines the steps for installing an RRU using pole hoops, applicable to specific pole diameters.
Describes the procedure for mounting the RRU unit onto a gantry structure, including adapter plates and fixing clamps.
Details the installation of the RRU unit onto an L-shape support structure, covering necessary components and steps.
Details the procedure for installing the protective grounding cable to ensure electrical safety and proper earthing.
Explains how to connect antenna feeder cables, considering distance factors and necessary connectors.
Describes the process of installing a monitoring cable to connect external monitoring devices.
Outlines the procedure for installing the AISG cable, used for transmitting signals to/from RET antennas.
Details the steps for connecting the DC power input cable, including preparing connectors and securing connections.
Describes how to install the optical fiber cable, including preparing modules, inserting connectors, and securing the cable.
Explains how to protect unused interfaces on the ZXSDR R8854 to prevent dust and moisture ingress.
To Next Page
