Zte ZXSDR R8854 - 5.6 Installing an Optical Fiber Cable

Chapter5CableInstallation
WhenyoumaketheconnectoroftheDCpowercable,cutofftheexposedshielded
layerafterstrippingoffthecableendandbindtheconnectorwithaheatshrinktube
orinsulatingtape.
13.Labelthepowercableatbothends.
–EndofSteps–
5.6InstallinganOpticalFiberCable
Thisproceduredescribeshowtoinstallanopticalbercable.
Steps
InstallingOpticalFiber
1.Openthecrimpingclipattheleftsideofthemaintenancewindow,seeFigure5-15.
Figure5-15Openthecrimpingclip
2.Removethecabletieatoneendofthecorrugatedpipemarkedas"RRU"byusingthe
diagonalpliers.
3.Removethewhitedustcapoftheopticalcableconnector,seeFigure5-16.
Figure5-16Removethewhitedustcap
1.Whitedustcap
5-15
SJ-20160405141455-003|2018-01-03(R1.3)ZTEProprietaryandCondential