ZXV10 W300 Quick Installation Manual
and hold down the button for more than 10 seconds when the device is
powered on. This will restore the current settings to the factory defaults
and then the system will restart automatically.
3.3 Computer Setup
3.3.1 Checking Computer Settings
If your computer uses a proxy server to access the Internet, first you must
disable the proxy service. You must also close the VPN software and the
firewall running on your computer. In the Microsoft Internet Explorer,
check the proxy service settings as follows:
1. In the browser window, select Tools > Internet Options.
2. Click the Connections tab and then the LAN Settings button.
3. Make sure the Use a proxy server for your LAN box is unchecked.
If it is checked, uncheck it and click OK.
3.3.2 Configuring TCP/IP
If your computer uses Windows 95/98/ME/2000/XP, set up your
computer using one of the following two methods of which the first one
is recommended. The following examples use Windows XP as the
operating system. The setup of computers using other operating systems
is similar.
1. The PC can obtain an address from the device via DHCP.
1) From the Windows taskbar, select Start > Control
Panel.
2) Double-click the Network Connection icon.
3) From the right-button menu, select Local Area
Connection > Properties. Select Internet Protocol
(TCP/IP) > Properties.
4) From the Internet Protocol (TCP/IP) Properties
dialog box:
Ensure that Obtain IP address Automatically is checked.
5) Ensure that Obtain DNS server address
14
To Next Page
Loading...
