Zte ZXV10 W300 - 4.5 WAN and Wireless Settings

Chapter 4 Wizard
the ZXV10 W300 device and configure DDNS (requires service
subscription from your service provider and network carrier).

 WAN connection: The default is the WAN connection for the
ZXV10 W300.
 DDNS server: Specifies the DDNS server.
 Dynamic DNS: Enables/disables DDNS client for the WAN
connection.
 Server: DDNS server URL (This option is displayed and
needs to be configured only when GNUDIP http is selected.
The default URL is
http://ns.eagleeyes.com.cn/cgi-bin/gdipupdt.cgi).
 Username: Username assigned by the DDNS server vendor.
 Logon Password: Password assigned by the DDNS server
vendor.
 Domain name: Domain name registered for the DDNS
server.
4.7.5 TR069

TR069 is the CPE WAN-side management protocol used for the
29
