Zte ZXV10 W811N - 3 Product Installation; 3.1 Installation Requirements

NameStatusDescription
Blinking
Thedeviceisstartingup,upgradingsoftware,or
detectinganerrorduringself-check.
Status
OffThedeviceworksnormally.
OnThedeviceispoweredon.
Power
OffThedeviceispoweredofforisfaulty.
OnThedeviceenablestheWLANfunctionnormally.
BlinkingThedeviceistransmittingdata.
WLAN
Off
ThedevicedoesnotenabletheWLANfunctionoris
faulty.
On
Thedeviceissuccessfullyconnectedtothe
10M/100M/1000MEthernetport.
BlinkingThedeviceistransmittingdata. Eth
Off
ThedevicefailstoconnecttotheEthernetportoris
faulty.
2.4Interface Interface
Interface
Description Description
Description
ZXV10W811NTheinterfacesandbuttonsaredescribedinthetableasbelow.
InterfaceNameDescription
Power
Powerinterface,connectedtotheoriginalpoweradapter
accompanyingthedevice
Reset
Resetbutton;inpower-uprunningstatus,keeppressingthe
buttonforover5s,andthecurrentconfigurationwillberesetas
factory-leavingconfiguration.Thesystemwillrestartautomatically
Ethernet
Ethernetinterface,connectedtothenetworkportofcomputeror
othernetworkequipmentthroughtheRJ-45networkwire
COM
Consoleport,connectingthecomputerandtheConsoleport;
Baudrateis115200.Itsupportstheusertomanageanddebug
equipmentsthroughtheConsolemode(notsuggestedfornormal
users)
3 3
3
Product Product
Product
Installation Installation
Installation
3.1Installation Installation
Installation
Requirements Requirements
Requirements
Beforethedeviceisinstalledandused,thefollowingrequirementsmustbemet:
7