ZUG CombiSteamer V6000 User Manual

4 Operation
▸ Check and change the settings.
– When cooking, the current food probe temperat-
ure is shown in the bottom part of the display
next to the target temperature.
– The set target temperature is displayed to the
right of .
55min
13:21
75°C
35°C
– Operation ends automatically once the target temperature has been reached (see
page 29).
If the food is left in the cooking space after switching off the appliance, the food
probe temperature can continue to rise due to residual heat.
Measuring the food probe temperature
To measure the food probe temperature only and without operation stopping automatic-
ally when the target temperature is reached, proceed as follows:
▸ Select the desired application (see page 16).
▸ Plug in the food probe.
▸ Press «Start» to start the application.
4.8 Options
Overview
Each application offers different options. Your appliance has the following options:
Preheat (see page 22)
Food probe temperature (see page 20)
Steaming (see page 33)
Start later (see page 23)
Cool down with AutoDoor (depending on model)
Selecting and starting options
▸ Select an application from the desired application group and confirm with «OK», if re-
quired (see page 16).
– The ready to start screen appears in the display.
▸ Touch .
– The options menu appears in the display:
OK
Start later
Food probe
The core temperature can
be monitored with the food
probe or can be used instead
of the operating time to
automatically switch off
operation.
57°C
Food probe
21

ZUG CombiSteamer V6000 Specifications

General

Category	Electric Steamer
Brand	ZUG
Steam@Clean	Yes
SoftRoasting	Yes
Hot air	Yes
Steaming	Yes
Combi-Steaming	Yes
Regeneration	Yes
Automatic programmes	Yes
Electronic clock timer	Yes
Core temperature probe	Yes
Timer	Yes
Cooking Modes	Hot air, Steaming, Combi-Steaming, Regeneration, SoftRoasting
Self-Cleaning	Steam@Clean
Appliance category	CombiSteamer
Lighting	LED
Oven capacity	44 litres
Water Tank Capacity	1.2 l