ZIP4x5 User’s Guide
Version 1.0.2 7
Calling Functions
Make a Call
Call appearances 1 through 3 always access Ethernet circuits. Call
appearance 4 accesses an analog circuit if your phone is configured for
analog calls. To configure the ZIP4x5 for analog calls, select Menu | User
Settings | Analog.
To make a call, press an inactive call appearance button or activate the
handset, headset, or speaker. Dial the number and press the # key.
The # key “sends” the call. If you do not press the # key, the phone dials
the number after a short delay.
Answer a Call
To answer a call, press the flashing call appearance button or activate the
handset, headset, or speaker. Always place active calls on hold before
answering incoming calls.
Terminate a Call
To terminate a call, replace the handset on its cradle, press the hook
button to disable the headset, press the speaker key to disable the
speaker, or press its call appearance button.
To Next Page
Loading...
