Chapter 4: Email Alert Configuration
Common SMTP Details
Please visit follwing site for detailed SMTP details including gmail, hotmail, yahoo and so on.!
https://goo.gl/g5NSnq!
Setup Motion Email Alert on NVR
1. Go to Main Menu > Sys Setup > Network > Email Setup!
2. Put in correct SMTP details. !
3. User is normally your email address!
4. Password is normally your email password!
5. Receiver is the email address you want to receive the alert!
6. Sender should be your email address!
7. Select SSL on the Encryption type!
8. file should be ticked if your want to receive a image with the email.!
Setup Motion Email Alert on IP Camera
To setup the email alert on your IP Camera you need to do in a Web browser.!
1. Login to your web interface through Internet Explorer. (Refer to Chapter 1 if you don’t know how to
login to your IP Camera by web interface)!
2. Click on Service!
3. Put in correct SMTP details. !
4. A/C name is normally your email address!
5. Password is normally your email password!
6. Receiver is the email address you want to receive the alert!
7. Sender should be your email address!
8. file should be ticked if your want to receive a image with the email.!
9. Main title can be anything, such as “motion alert from home”!
10. Tick SSL or Encryption!
11. And click on save!
Bear in mind, some model of the IP cameras does not support SSL. Therefore Hotmail or Gmail will not
work. You need to register a email box separately for those models. Model including (Megavalue, Nightlife,
DarkEagle). Compatible email service for those model include: https://en.mail.qq.com/$
To Next Page
Loading...