ES-3100 Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
115
In this scenario, we are going to monitor the Broadcast Packets by using the
RMON MIB. The following will demonstrate the steps to monitor the Broadcast
Packets by using SNMPc Enterprise Edition Version 5.1.6c.
1. Methodology of Scenario Verification
1.Open your SNMPc program first, then pick the ZyXEL-3148 Switch (it is
first named as device “root”) and give it the correct IP information to get
the SNMP information. Also, you can rename it to whatever you want.
You can verify if your configuration is correct by using the “Poll
Object” option. Just right click our mouse on the ES-3148 icon and it is
located inside the “Tools”.
To Next Page
Loading...
