ZyXEL Communications Dimension ES-3124 - Chapter 10 Spanning Tree Protocol (STP); 10.1 STP Fundamentals

ES-3100 Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
95
Read Access Mode to SNMP V2c.
Figure 6 Read Access mode
Step 5: In the map object properties, select Access tab to set the parameters
of Read /Write Access Mode to SNMP V2c shown in Figure 7. Change the
value of Read/write Access Mode to SNMP V2c.
Figure 7 Read/Write Access Mode