ZyXEL Communications Dimension GS-1548 - DSCP Based Qos Screen

Chapter 11 QoS
GS-1524/GS-1548 User’s Guide
73
You can configure the DSCP to IEEE 802.1p mapping to allow the Switch to
prioritize all traffic based on the incoming DSCP value according to the DiffServ to
IEEE 802.1p mapping table.
11.4.4 DSCP Based QoS Screen
You can configure the Switch to assign a IEEE 802.1p priority to packets coming
into the Switch with DSCPs assigned to them. Select DSCP Based QoS in the
QoS Enhancement Setting screen to view the following screen.
Figure 41 DSCP Based QoS