ES-2000 Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
53
In the configure mode of CLI,
L2Switch(config)# igmp-snooping
Step three: Display the IGMP Status
In the exec mode of CLI
GS-4024# show router igmp
Step Four: Display the IGMP snooping Status
In the exec mode of CLI
L2Switch# show igmp-snooping
______________________________________________________________
Note: One thing needs to be mentioned is that in the IGMP router, we do not
need to enable IGMP snooping function.
To Next Page
Loading...
