Chapter 10 Home Networking
AX/DX/EX/PX Series User’s Guide
223
Figure 125 Network Setting > Home Networking > Additional Subnet
The following table describes the labels in this screen.
Table 59 Network Setting > Home Networking > Additional Subnet
LABEL DESCRIPTION
IP Alias Setup
Group Name Select the interface group name for which you want to configure the IP alias settings.
Active Click this switch to configure a LAN network for the Zyxel Device. When the switch goes to the
right , the following fields will be configurable. Otherwise, they are not.
IPv4 Address Enter the IP address of your Zyxel Device in dotted decimal notation.
Subnet Mask Your Zyxel Device will automatically calculate the subnet mask based on the IPv4 address that
you assign. Unless you are implementing subnetting, use this value computed by the Zyxel
Device.
Public LAN
Active Click this switch to enable or disable the Public LAN feature. When the switch goes to the right
, the function is enabled. Otherwise, it is not.
Your ISP must support Public LAN and static IP.
To Next Page
Loading...
