To Next PageTo Next Page
Need help?Do you have a question about the ZyXEL Communications EMG3425-Q10A and is the answer not in the manual?
General| Product Type | Wireless Gateway |
|---|---|
| Wireless Standards | 802.11 a/b/g/n/ac |
| Frequency Band | 2.4 GHz, 5 GHz |
| Type | Wireless |
| Ethernet Ports | 4 x 10/100/1000 Mbps |
| WAN Ports | 1 x Gigabit Ethernet |
| Security Features | Firewall |
| DSL Port | Not applicable |
| USB Ports | 1 x USB 2.0 |
This chapter introduces the main features and applications of the EMG3425-Q10A.
Reload the factory-default configuration file using the RESET button.
Describes how to access the EMG3425-Q10A Web Configurator and its screens.
Details the 'admin' and 'supervisor' system accounts and their privilege levels.
Steps to connect your computer and access the Web Configurator.
The initial screen for entering username and password to access the Web Configurator.
Prompts to change the password, highly recommended for security.
Explains the Router and Access Point modes for the device.
Default mode for connecting the local network to another network like the Internet.
Use as an access point to bridge wired and wireless networks.
Example of setting up a wireless network using WPS (Push Button or PIN).
Configure wireless security and connect your computer without using WPS.
Configure multiple SSIDs to enable multiple wireless networks and guest access.
Discusses WAN screens for configuring Internet access.
Configure Internet Connection, IP, DNS, and WAN MAC addresses.
Discusses configuring wireless network settings for 2.4GHz and 5GHz bands.
DHCP allows clients to obtain TCP/IP configuration at start-up from a server.
NAT translates the IP address of a host in a packet.
Forward incoming service requests to local network servers.
Enable and configure the firewall to protect your network from unwanted traffic.
Configure content filtering to block certain web features.
Enable and create IPv6 firewall rules to block unwanted IPv6 traffic.
Block specific URLs and define time periods for parental control.
Configure QoS to prioritize traffic and fine-tune network performance.
Enable or disable QoS and set upstream bandwidth.
Provides information on managing the EMG3425-Q10A from a remote location.
Manage remotely via WWW, Telnet, SNMP, Wake On LAN, and TR069.
Configure media sharing settings for the EMG3425-Q10A.
Configure port speed and duplex settings for Ethernet ports.
Manage session timeout, password, time, firmware, backup, restart, language, and diagnostics.
Change the system password.
Upload firmware to your EMG3425-Q10A.
Back up or restore the EMG3425-Q10A’s configuration.
Configure the EMG3425-Q10A as a router or access point.
Select the device operation mode: Router or Access Point.
Provides suggestions to solve common problems you might encounter.
Troubleshoot power issues, hardware connections, and LED behavior.
Resolve issues with IP address, forgotten passwords, and login screen access.
Troubleshoot problems with accessing the Internet or slow connections.
Reset the device to factory defaults, losing all current configurations.
Troubleshoot issues with wireless LAN access and connectivity.
Troubleshoot issues with accessing or seeing connected USB devices.
