EMG3425-Q10A User’s Guide
176
CHAPTER 25
Maintenance
25.1 Overview
This chapter provides information on the Maintenance screens.
25.2 What You Can Do
•Use the General screen to set the timeout period of the management session (Section 25.3 on
page 176).
•Use the Account screen to change your EMG3425-Q10A’s system password (Section 25.4 on
page 177).
•Use the Time screen to change your EMG3425-Q10A’s time and date (Section 25.5 on page
178).
•Use the Firmware Upgrade screen to upload firmware to your EMG3425-Q10A (Section 25.6 on
page 180).
•Use the Backup/Restore screen to view information related to factory defaults, backup
configuration, and restoring configuration (Section 25.8 on page 183).
•Use the Restart screen to reboot the EMG3425-Q10A without turning the power off (Section
25.8 on page 183).
•Use the Sys OP Mode screen to select how you want to use your EMG3425-Q10A (Section 25.10
on page 184).
•Use the Language screen to change the language for the Web Configurator (Section 25.11 on
page 185).
•Use the Diagnostic > Ping screen to ping an IP address (Section 25.12 on page 185).
25.3 General Screen
Use this screen to set the management session timeout period. Click Maintenance > General.
The following screen displays.
To Next Page
Loading...
