Chapter 24 Port Configuration
EMG3425-Q10A User’s Guide
175
Duplex Select the duplex mode of the Ethernet connection on this port. The choices are Auto,
Full and Half.
Selecting Auto (auto-negotiation) allows one port to negotiate with a peer port
automatically to obtain the duplex mode that both ends support. If the peer port does
not support auto-negotiation or turns off this feature, the EMG3425-Q10A determines
the connection speed by detecting the signal on the cable and using half duplex mode.
Apply Click Apply to save your changes with the EMG3425-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.
Table 72 Management > Port Configuration (continued)
LABEL DESCRIPTION
To Next Page
Loading...
