ZyXEL Communications EMG3425-Q10A - LAN IP Screen; IP Alias Screen

Chapter 10 LAN
EMG3425-Q10A User’s Guide
90
10.4 LAN IP Screen
Use this screen to change the IP address for your EMG3425-Q10A. Click Network > LAN > IP.
Figure 48 Network > LAN > IP
The following table describes the labels in this screen.
10.5 IP Alias Screen
Use this screen to have the EMG3425-Q10A apply IP alias to create LAN subnets. Click LAN > IP
Alias.
Figure 49 Network > LAN > IP Alias
Table 31 Network > LAN > IP
LABEL DESCRIPTION
IP Address Type the IP address of your EMG3425-Q10A in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your
EMG3425-Q10A will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the EMG3425-Q10A.
Apply Click Apply to save your changes back to the EMG3425-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.