ZyXEL Communications EMG3425-Q10A - Wpa;Wpa2

Chapter 9 Wireless LAN
EMG3425-Q10A User’s Guide
77
9.3.3 WPA/WPA2
Select WPA or WPA2 from the Security Mode list.
Note: WPA or WPA2 is not available if you enable WPS before you configure WPA or WPA2
in the Wireless LAN 2.4G/5G > General screen.
Figure 36 Network > Wireless LAN 2.4G/5G > General: WPA/WPA2
Apply Click Apply to save your changes back to the EMG3425-Q10A.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 21 Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK (continued)
LABEL DESCRIPTION