Chapter 10 LAN
EMG3425-Q10A User’s Guide
91
The following table describes the labels in this screen.
10.6 IPv6 LAN Screen
Use this screen to configure the IPv6 address for your EMG3425-Q10A on the LAN. Click Network
> LAN > IPv6 LAN.
Figure 50 Network > LAN > IPv6 LAN
The following table describes the labels on this screen.
Table 32 Network > LAN > IP Alias
LABEL DESCRIPTION
IP Alias 1, 2 Check this to enable IP alias to configure another LAN network for the EMG3425-Q10A.
IP Address Type the IP alias address of your EMG3425-Q10A in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your
EMG3425-Q10A will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the EMG3425-Q10A.
Apply Click Apply to save your changes back to the EMG3425-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.
Table 33 Network > LAN > IPv6 LAN
LABEL DESCRIPTION
RA period
Minimum RA period Enter the minimum time in seconds between router advertisement messages.
LAN IPv6 Address Assignment
Enable DHCPv6-PD
Select this option to use DHCPv6 prefix delegation. The EMG3425-Q10A will obtain an IPv6 prefix from the ISP
or a connected uplink router for the LAN.
To Next Page
Loading...
