Chapter 9 Wireless LAN
EMG3425-Q10A User’s Guide
84
Figure 42 Network > Wireless LAN 2.4G/5G > QoS
The following table describes the labels in this screen.
9.8 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN 2.4G/5G > WPS.
Note: With WPS, wireless clients can only connect to the wireless network using the first
SSID on the EMG3425-Q10A.
Table 27 Network > Wireless LAN 2.4G/5G > QoS
LABEL DESCRIPTION
WMM QoS Select Enable to have the EMG3425-Q10A automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes
them run more smoothly.
This field is not configurable and the EMG3425-Q10A automatically enables WMM QoS
if you select 802.11n, 802.11an, 802.11gn or 802.11bgn in the Wireless LAN
24G/5G > General screen.
Apply Click Apply to save your changes to the EMG3425-Q10A.
Cancel Click Cancel to reload the previous configuration for this screen.
To Next Page
Loading...
