ZyXEL Communications EMG3425-Q10A - Page 85

Chapter 9 Wireless LAN
EMG3425-Q10A User’s Guide
85
Figure 43 Network > Wireless LAN 2.4G/5G > WPS
The following table describes the labels in this screen.
Table 28 Network > Wireless LAN 2.4G/5G > WPS
LABEL DESCRIPTION
WPS Setup
WPS Select Enable to turn on the WPS feature. Otherwise, select Disable.
PIN Code Select Enable and click Apply to allow the PIN Configuration method. If you select
Disable, you cannot create a new PIN number.
PIN Number This is the WPS PIN (Personal Identification Number) of the EMG3425-Q10A. Enter this
PIN in the configuration utility of the device you want to connect to the EMG3425-Q10A
using WPS.
The PIN is not necessary when you use WPS push-button method.
Click Generate to generate a new PIN number.
WPS Status
Status This displays Configured when the EMG3425-Q10A has connected to a wireless
network using WPS or when WPS Enable is selected and wireless or wireless security
settings have been changed. The current wireless and wireless security settings also
appear in the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the EMG3425-Q10A or you click Release Configuration to remove
the configured wireless and wireless security settings.
Release
Configuration
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the EMG3425-Q10A.
802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can associate with the
EMG3425-Q10A.
SSID This is the name of the wireless network (the EMG3425-Q10A’s first SSID).
Security This is the type of wireless security employed by the network.