Chapter 2 Introducing the Web Configurator
EMG3425-Q10A User’s Guide
20
3 The EMG3425-Q10A is in router mode by default. Type "http://192.168.1.1" as the website
address.
If the EMG3425-Q10A is in access point, the IP address is 192.168.1.2. See Chapter 3 on page 23
for more information about the modes of the EMG3425-Q10A.
Your computer must be in the same subnet in order to access this website address.
2.3.1 Login Screen
The Web Configurator initially displays the following login screen.
If you are logging in with the “admin” account, type “1234” (default) as the password.
If you are logging in with the “supervisor” account, type “supervisor” (default) as the password.
Then click Login.
Figure 5 Login screen
The following table describes the labels in this screen.
Table 3 Login screen
LABEL DESCRIPTION
Language Select the language you want to use to configure the Web Configurator.
User Type “supervisor” or "admin" (default) as the user name.
Password Type “supervisor” or "1234" (default) as the password. Click Login.
This shows the current weather, either in celsius or fahrenheit, of the city you specify in
Section 2.3.2.1 on page 21.
This shows the time (hh:mm:ss) and date (yyyy:mm:dd) of the timezone you select in
Section 25.5 on page 178. The time is in 24-hour format, for example 15:00 is 3:00 PM.
To Next Page
Loading...
