Chapter 7 Monitor
EMG3425-Q10A User’s Guide
52
drop list. The log choices depend on your settings in the Log Setting screen. Click Refresh to
renew the log screen. Click Clear Log to delete all the logs.
Figure 19 View Log
You can configure which logs to display in the View Log screen. Go to the Log Setting screen and
select the logs you wish to display. Click Apply to save your settings. Click Cancel to start the
screen afresh.
Figure 20 Log Settings
7.4 DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the EMG3425-Q10A’s LAN
as a DHCP server or disable it. When configured as a server, the EMG3425-Q10A provides the TCP/
IP configuration for the clients. If DHCP service is disabled, you must have another DHCP server on
that network, or else the computer must be manually configured.
To Next Page
Loading...
