EMG3425-Q10A User’s Guide
31
CHAPTER 5
Access Point Mode
5.1 Overview
Use your EMG3425-Q10A as an access point (AP) if you already have a router or gateway on your
network. In this mode your EMG3425-Q10A bridges a wired network (LAN) and wireless LAN
(WLAN) in the same subnet. See the figure below for an example.
Figure 11 Wireless Internet Access in Access Point Mode
Many screens that are available in Router Mode are not available in Access Point Mode, such as
bandwidth management and firewall.
5.2 What You Can Do
•Use the Status screen to view read-only information about your EMG3425-Q10A (Section 5.4 on
page 33).
•Use the LAN screen to set the IP address for your EMG3425-Q10A acting as an access point
(Section 5.5 on page 35).
5.3 What You Need to Know
See Chapter 6 on page 38 for a tutorial on setting up a network with the EMG3425-Q10A as an
access point.
To Next Page
Loading...
