Chapter 25 Maintenance
EMG3425-Q10A User’s Guide
184
Figure 114 Access Point Mode
25.10 Sys OP Mode Screen
Use this screen to select how you want to use your EMG3425-Q10A.
Note: If you select the incorrect System Operation Mode you may not be able to connect
to the Internet.
Figure 115 Maintenance > Sys OP Mode
The following table describes the labels in the Sys OP Mode screen.
Table 79 Maintenance > Sys OP Mode
LABEL DESCRIPTION
Configuration Mode
Router Mode Select Router Mode if your device routes traffic between a local network and another
network such as the Internet. This mode offers services such as a firewall or bandwidth
management.
You can configure the IP address settings on your WAN port. Contact your ISP or system
administrator for more information on appropriate settings.
To Next Page
Loading...
