EasyManua.ls Logo

ZyXEL Communications EMG3425-Q10A - Page 30

ZyXEL Communications EMG3425-Q10A
250 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Router Mode
EMG3425-Q10A User’s Guide
30
Remote
MGMT
WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP or HTTPS to manage the EMG3425-Q10A.
Telnet Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the EMG3425-Q10A.
SNMP Use this screen to to configure your EMG3425-Q10A's settings for Simple
Network Management Protocol management.
Wake On LAN Use this screen to enable Wake on LAN to remotely turn on a device on the
local network.
TR069 Use this screen to configure the EMG3425-Q10A to be managed by an ACS
(Auto Configuration Server).
UPnP UPnP Use this screen to enable UPnP on the EMG3425-Q10A.
USB Media
Sharing
DLNA Use this screen to have the EMG3425-Q10A function as a DLNA-compliant
media server, that lets DLNA-compliant media clients play video, audio, and
photo content files stored on the connected USB storage device.
SAMBA Use this screen to enable file sharing through the EMG3425-Q10A.
FTP Use this screen to have the EMG3425-Q10A act as a FTP server.
Port
Configuration
Port
Configuration
Use this screen to change the Ethernet port speed and duplex settings.
MAINTENANCE
General General Use this screen to view and change administrative settings such as system
and domain names.
Account User Account Use this screen to change the password of your EMG3425-Q10A.
Time Time Setting Use this screen to change your EMG3425-Q10A’s time and date.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your EMG3425-Q10A.
Backup/
Restore
Backup/
Restore
Use this screen to backup and restore the configuration or reset the factory
defaults to your EMG3425-Q10A.
Restart System
Restart
This screen allows you to reboot the EMG3425-Q10A without turning the
power off.
Sys OP Mode Sys OP Mode This screen allows you to select whether your device acts as a router, or an
access point.
Language Language This screen allows you to select the language you prefer.
Diagnostic Ping Use this screen to ping an IP address.
Table 8 Navigation Panel: Router Mode (continued)
LINK TAB FUNCTION

Table of Contents

Related product manuals