Chapter 6 Diagnostic
FMG Series User’s Guide
37
6.3 Traceroute
Use this screen to trace the route that packets take for troubleshooting. After entering an IP address and
clicking Go to start a test, the results will show. Click Diagnostic > Traceroute to open the screen shown
next.
Figure 18 Diagnostic > Traceroute
The following table describes the fields in this screen.
Table 17 Diagnostic > Traceroute
LABEL DESCRIPTION
Host Address Type the IP address of a computer that you want to perform traceroute in order to test a
connection.
Trace Route Click this to display the route path and transmission delays between the FMG to the IPv4 address
that you entered.
To Next Page
Loading...
