Chapter 5 Advance
FMG Series User’s Guide
30
5.4.1 Add/Modify QoS Classification Rules
Click Add in the QoS Classification screen to open the following screen.
Figure 16 QoS Classification
The following table describes the labels in this screen.
802.1p Mark
Enter a priority level with which the FMG replaces the IEEE 802.1p priority field in the packets.
Delete Use this to delete an existing classifier. Note that subsequent rules move up by one when
you take this action.
Edit Use this to edit the classifier.
Add Click Add to create a new classifier.
Apply Changes Click Apply Changes to save your changes.
Table 12 Advance > QoS Classification (continued)
LABEL DESCRIPTION
Table 13 QoS Classification: Add/Modify
LABEL DESCRIPTION
Direction
Select the direction (Upstream or Downstream) that you want to allocate using QoS.
RuleName Enter a descriptive name of up to 15 printable English keyboard characters, not including
spaces.
RuleOrder Enter a number for where you want to put this classifier to move the classifier to the number you
selected after clicking Apply Changes.
Specify Traffic Classification Rules
To Next Page
Loading...
