FMG Series User’s Guide
45
CHAPTER 12
Statistics
12.1 Overview
Use the Statistics screens to look at the network traffic status and statistics of the LAN interfaces and fiber
connection.
12.1.1 What You Can Do in this Chapter
• Use the Interface screen to view the LAN traffic statistics (Section 12.2 on page 45).
• Use the Fiber screen to view the traffic statistics of the fiber connection (Section 12.3 on page 46).
12.2 Interface
Click Statistics > Interface to open the following screen. Figures about data that have been sent to and
received from each LAN port (including wireless) are displayed in the following table.
Figure 29 Statistics > Interface
The following table describes the fields in this screen.
Table 22 Statistics > Interface
LABEL DESCRIPTION
Interface This shows the LAN or WLAN interface.
Rx pkt This indicates the number of received packets on this interface.
Rx err This indicates the number of frames with errors received on this interface.
Rx drop This indicates the number of received packets dropped on this interface.
Tx pkt This indicates the number of transmitted packets on this interface.
Tx err This indicates the number of frames with errors transmitted on this interface.
Tx drop This indicates the number of outgoing packets dropped on this interface.
To Next Page
Loading...
