FMG Series User’s Guide
44
CHAPTER 11
Time Zone
11.1 Time Zone Overview
Use the Time Zone screen to setup the system time and SNTP (Simple Network Time Protocol) server
settings.
11.2 The Time Zone Screen
In the navigation panel, click Maintenance > Time Zone to display the screen as shown.
Figure 28 Maintenance > Time Zone
The following table describes the labels in this screen.
Table 21 Maintenance > Time Zone
LABEL DESCRIPTION
Current Time This field displays the time of your FMG.
Each time you reload this page, the FMG synchronizes the time with the time server.
Time Zone Select Select the time zone from the dropdown list.
Enable Daylight
Saving Time
Select the check box to use Daylight Saving Time to offset the system time or clear the check
box to not adjust system time.
Enable SNTP
Client Update
Select the check box to enable using a simple network time protocol (SNTP) server to manage
the system time or clear the check box to manually manage system time.
SNTP Server Enter the address of the simple network time protocol (SNTP) server as an IP address
(192.168.0.1) or as a URL (www.zyxel.com).
Enter the port number of the SNTP server. The numeric value can be between 1 and 65535.
Apply Click Apply to save the changes.
Refresh Click Refresh to reload the page.
To Next Page
Loading...
